TECHNICAL CHARACTERISTICS: 6890 Non-woven Wallpaper 150

150g Matte Wallpaper

DESCRIPTION:

150g matte white non-woven wallpaper made in France (raw material produced in Germany)
Produced by DIATECX FRANCE sas,
27 Bd d’Anvaux, 36000 Châteauroux,
+33(0)2 54 60 37 20,
info@diatrace.com,
www.diatrace.com

PROPERTIES:

• Natural whiteness and surface
• Very fast drying time
• Good opacity
• High dimensional stability and moisture resistance
• Can be applied with standard non-woven wallpaper glue
• PVC-free
• FSC certified
• Fire classification: C-s1, do (ISO EN 13501-1: 2007)
• Washable
• Complies with Reach, POP, and EU Biocides regulations
• Complies with standard NF EN 15102+A1
• No SVHC substances

APPLICATION:

Wall covering to be printed.
Glue-on non-woven: use a non-woven wallpaper adhesive suitable for the surface to be decorated. Edge-to-edge or overlapping installation.
For further details, see «Instructions for printing and cutting the wallpaper» below and the installation instructions.

Edge-to-edge installation:

• With digital cutting: printing with an overlap of 2 to 4 mm, and then cutting the overlap to size.
• With manual cutting: printing with an overlap of 1 cm, then cut the strips flat on top of each other (double cut).

Overlapping installation:

• Printed with an overlap of 1 to 1.5 cm. Installation on the wall and double cut on the wall.

These installation tips apply to all non-wovens.

Instructions for removal:

Remove the printed surface and then spray the remaining area with warm water to reactivate the glue and remove the last wet layer.
Finally, clean up the glue residue with a damp sponge.

INSTRUCTIONS FOR PRINTING AND CUTTING THE WALLPAPER:

actedeco
PHONE
+33 (0)2 51 44 95 32

E-MAIL
contact@acte-deco.fr

ADDRESS
Halles 1 & 2
5 Allée Frida Kahlo
44200 Nantes
France

WEBSITE
www.acte-deco.fr

COLOURS

White

ASPECT

Matte

USAGE

Interior

ENVIRONMENT

Without PVC
No SVHC substances

CERTIFICATION

TECHNOLOGY